How to Realize Single Fiber Connection in WDM System?

-
As we all know, fiber optical networking has two transmission ways: dual fiber transmission and single fiber transmission. The difference between them is that the former one requires two fibers—one is for transmitting and the other is for receiving, while the latter only uses one fiber for both transmitting and receiving. Single fiber transmission emergence reduces network deployment cost, especially in WDM systems. This blog intends to introduce how to achieve single fiber connections in CWDM and DWDM networks.

Understanding Single Fiber Transmission
Single fiber transmission, also called bidirectional (BiDi) transmission, sends data in both directions with one strand fiber. For enterprise networks or telecom networks providers who are with limited budgets and fiber capacity, the single fiber transmission is no doubt an ideal choice.

In addition, single fiber transmission is popular in many places.
  • Point to Point, Ring or linear Add and Drop, where installing new fiber is difficult or expensive
  • Enable segmentation of the enterprise traffic over 2 different fibers rather than using the same fiber for both segments
  • Increase reliability to an existing dual fiber solution by using one fiber for working and one for protecting
Single Fiber Solution in CWDM Systems
CWDM technology enables multiple channels (wavelengths) to be transmitted over the same fiber cabling and is able to provide a capacity boost in metro and access networks. Each channel carries data independently from each other, which allows network providers to transport different data rates and protocols (T1, T3, Ethernet, Serial, etc) for different customers or applications. Then how to achieve single fiber transmission in CWDM networks?
Here is an example of single fiber solution in CWDM system.
8-ch-single-fiber-cwdm-mux-demux
The above picture shows how different CWDM wavelengths are transmitted in a single fiber CWDM link. In this link, two 8CH CWDM Mux/Demuxs are required to transmit sixteen different wavelengths. At site A, there is a single fiber 8CH CWDM Mux/Demux using eight wavelengths for transmitting and the other different eight wavelengths for receiving. At site B, another 8CH single fiber CWDM Mux/Demux is deployed. But the wavelengths for TX and RX are reversed. And one single fiber connects the two CWDM Mux/Demux.

Notes: the use of transceivers connected with the CWDM Mux/Demux should be based on the wavelength of the TX side.

Single Fiber Solution in DWDM Systems
DWDM is an optical multiplexing technology to increase bandwidth over existing fiber optic networks, especially in long haul transmissions. And it can support more channels and higher traffic services such as 40G, 100G of LAN/WAN. Since the cost of DWDM components is high, the single fiber transmission is necessary.
DWDM single fiber transmission can be achieved with the use of single fiber DWDM Mux/Demux. As the following picture shows.
DWDM single fiber solution
The picture shows a single fiber 8CH DWDM Mux/Demux with expansion port used for single fiber transmission. Similar to the single fiber CWDM Mux/Demux above, this DWDM Mux/Demux also uses eight wavelengths for transmitting and another eight wavelengths for receiving. In general, the DWDM Mux/Demux should be used in pairs in single fiber bi-directional transmission, and the Mux/Demux port for specific channel must be reversed. Besides, more channels can be added into the links with the expansion port.

This 8CH DWDM Mux/Demux single fiber solution allows extremely high utilizing of a single fiber strand to pass up to 16 wavelengths, optimizing the use of fiber optic cables. And in long distance transmission, optical amplifier also can be utilized.

FS.COM Single Fiber Solution
FS.COM supplies various single fiber CWDM & DWDM Mux/Demux and optical transceivers. Here is part of our Mux/Demux products.

Single Fiber CWDM & DWDM Mux/Demux Product ID Operating Channel
cwdm mux-demux 43779 Tx/Rx:1310/1290, 1350/1330, 1390/1370, 1430/1410, 1490/1470, 1530/1510, 1570/1550, 1610/1590
DWDM mux-demux 50117 Tx/Rx:C21/C22,C23/C24,C25/C26,C27/C28, C29/C30,C31/C32,C33/C34,C35/C36
sources:http://www.fiber-optic-components.com/how-to-realize-single-fiber-connection-in-wdm-system.html

评论

发表评论

此博客中的热门博文

Smart Switch vs Managed Switch: What’s the True Difference?

-
图片
Ethernet switches can be regarded as the “brain” of a network. In today’s market of network switches, there are mainly three types of Ethernet switches: managed switch, smart switch and unmanaged switch. Like the discussion about managed vs unmanaged switch, the topic of “smart switch vs managed switch” is also be discussed heatedly. Then what’s the true difference between smart switch and managed switch? Let’s have a further look. Smart Switch vs Managed Switch: Differences lies in Definition What Is a Smart Switch? A smart switch provides basic managed switch features such as QoS, security, and web management. Usually, smart switches are managed via a web browser, which provides intuitive guidance for users to manage their networks. If there is no advanced applications needed, smart switch is an optimal solution for simple applications like small and mid-sized business networks. What Is a Managed Switch? Managed switch, such as FS S3800-24T24S stackable managed switch
阅读全文

How to Calculate DWDM System Loss in Long Haul Transmission

-
图片
Nowadays, high capacity network is needed to deal with large amount of data transfer. The application of DWDM (dense wavelength division multiplexing) system is a commonly used technique to enhance network capacity. Due to its complexity caused by various components like EDFA and dispersion compensating module (DCM), it may be difficult to calculate the loss over the whole links, especially in long haul transmissions. Then, how to calculate the budget loss of a DWDM system in long haul transmission? This post will illustrate the method to solve this problem. Causes of Loss in Long Haul DWDM System Loss budget is always one of the crucial problems that need to be considered before deploying a network. Any components in optical links will introduce loss. For example, when add a DWDM mux to a DWDM network, it will cause insertion loss which is the total optical power loss (often measured by dB) caused by the insertion of an optical component. In long haul DWDM system, there are sev
阅读全文

25G Switch Comparison: How to Choose the Suitable One?

-
图片
Driven by the undeniable growth in demand for bandwidth of private and public cloud data centers, 25G Ethernet over a single lane has become the new trend for sever-to-switch interconnections. And the increasing requirements of higher speeds in data centers have enhanced the adoption of 25G switch, which is the new buzz in recent years. In this post, a simple analysis of 25G switch market and comparison of commonly used 25G switches will be explored. 25G Switch Market Analysis As we know, before 25G technology advent, the existing options are one lane for 10G, four lanes for 40G, or four lanes at 25Gbps for 100G. The 25G technology meets the specification for existing module form factors like SFP28 and QSFP28, and allows for a breakout connection between 25G and 100G without changing the port on the front of many 100G switches. Besides, driven by the high speed and bandwidth, various switch manufacturers have announced their new 25G switches in recent three years, just to occupy
阅读全文